U.S. flag

An official website of the United States government, Department of Justice.

Firearms Examiner Training

Basic Toolmark Identification

Home  |  Glossary  |  Resources  |  Help  |  Contact Us  |  Course Map
 

Basic Toolmark Identification

Bolt cutter and lock
Bolt cutter and lock
Courtesy of Bill Conrad (see reuse policy).

Toolmark identification is a forensic science discipline that has as its primary concern the determination of whether or not a toolmark was produced by a particular tool. This determination is based on the class and individual marks in a given toolmark, which are products of the manufacturing process.

The main difference between firearms and toolmark identification is that the relative orientations of the harder object and the softer object in firearms examinations are easily predictable, while in the typical toolmark matter this is often not the case.

 

Incidental Toolmarks

Identification of striated marks
Identification of striated marks
Courtesy of Jack Dillon (see reuse policy).

Incidental marks are transferred by the operating surface of a tool making contact with the surface of a softer object. While class characteristics are planned by the manufacturer (e.g., width, shape, length), incidental marks (individual characteristics) are not planned and occur as a result of the manufacturing process as well as normal use of the tool.

These marks are as follows:

 

  • Striated toolmarks (also called striae, friction marks, abrasion marks, or scratch marks) produced when a tool is placed against another object and moved parallel to and across the object with pressure applied. The striations consist of the resulting surface contour variations.
  • Impressed toolmarks (also called compression marks) produced when a tool is placed against another object and sufficient force is applied to the tool to leave an impression. These impressions are contour variations left on the surface of the object by this interaction.
Toothmark impression left by arcjoint pliers
Toothmark impression left by arcjoint pliers
Courtesy of Jack Dillon (see reuse policy).

Both impressed and striated toolmarks may be produced by objects designed, manufactured, and marketed as task-specific tools or such tools misused for another purpose. Marks may be produced by other objects used as tools to gain a temporary mechanical advantage.

 

Reloading and Handloading

The processes involved in reloading and handloading ammunition produce toolmarks of a specialized type on ammunition components. In reloaded ammunition the marks are not the result of the discharge of a firearm. The action of the steel tools of a reloading press on the softer components of metallic ammunition may produce striated or impressed marks that can reflect class, subclass, and individual characteristics. The marks may potentially be reproduced, compared, and identified with a particular reloading tool.

Case turning tool
Case turning tool
Courtesy of Hornady (see reuse policy).

The process of identification of toolmarks produced by reloading tools is parallel to other toolmark identifications in that they include the following:

  • Characteristics that may be class, subclass, or individual
  • Pattern identification
  • AFTE Theory of Identification as it Relates to Toolmarks
  • Principle of sufficient agreement
  • Principle of consecutive matching striae
  • AFTE Range of Conclusions

In general, the most useful toolmarks produced by reloading equipment fall into two categories:

  • Cartridge case marks
    • Holding tools on a reloading press which grips the base of cartridge cases
    • Resizing tools (e.g., sizing die) which squeeze fired cases back to their original specifications
    • Crimping tools used for some loads to press the mouth of cases slightly into a cannelure used as a crimping groove
  • Bullets bearing bullet-seating toolmarks

Back Forward