U.S. flag

An official website of the United States government, Department of Justice.

Firearms Examiner Training

Visual and Microscopic Examination

Home  |  Glossary  |  Resources  |  Help  |  Contact Us  |  Course Map
 

Visual and Microscopic Examination

Residues surrounding a bullet hole
Residues surrounding a bullet hole
Courtesy of Jack Dillon (see reuse policy).

The preliminary visual and microscopic examinations of gunshot residues should be given first priority because subsequent chemical testing can dislodge residues or alter the appearance of physical effects.

Residues should initially be observed and evaluated by the unaided eye and with a low power (3x-30x) stereomicroscope. Infrared (IR) imaging may be used to visualize heavy soot on dark or bloody clothing. These preliminary examinations should be documented in laboratory notes. A designation for the portion of an evidence item under examination, such as an evidence item number and a hole designation (e. g., Item #23/Hole A) should be assigned.

 

Visualization of gunpowder residue patterns using a digital infrared camera and optical filters
Visualization of gunpowder residue patterns using a digital infrared camera and optical filters
Courtesy of Ann Davis (see reuse policy).

The physical characteristics that may be visible during the preliminary examination for use in testing and interpretation include these:

  • Hole in material
  • Visible ring around the perimeter of a hole, sometimes referred to as bullet wipe
  • Ripped or torn material in a stellate (star-shaped) pattern, consistent with a contact shot. When this is visible, especially in combination with burned, singed, or melted material, a distance determination can be made even in the absence of an evidence firearm.
  • Apparently burned or singed material, such as around a suspected bullet hole
  • Melted tips of artificial fibers
  • Apparent heavy vaporous lead residue, often referred to as smoke, visible around a suspected bullet hole
  • Burned, partially burned, or melted gunpowder adhered to the surface
  • Types of gunpowder particles present (e.g., flake, disc, ball, flattened ball, etc.)
  • Apparent particulate other than gunpowder (e.g., lead shavings, tiny solidified droplets, copper jacket fragments, etc.)

 

Back Forward