U.S. flag

An official website of the United States government, Department of Justice.

Firearms Examiner Training

General Rifling Characteristics

Home  |  Glossary  |  Resources  |  Help  |  Contact Us  |  Course Map
 

General Rifling Characteristics

Broach cut 6-left rifling pattern
Broach cut 6-left rifling pattern
Courtesy of FirearmsID.com (see reuse policy).

Gross impressions visible to the naked eye are made in the surface of bullets while in hard contact with the bore of the barrel. The clockwise or counterclockwise grooves inside a barrel result in groove impressions (higher areas) on the surface of a fired bullet. The areas between the grooves inside a barrel (lands) result in

land impressions (lower areas) on the surface of a fired bullet. These gross impressions can be associated with a number of brands and models of firearms of certain classes. In the field of firearms identification, these class characteristics are called general rifling characteristics (GRC).

Although GRCs cannot identify a specific firearm, they are a useful investigative tool. They can provide invaluable lead information to investigators concerning the type of firearm.

 

Categories

The categories of general rifling characteristics are

  • caliber (bore diameter),
  • number of land and groove impressions,
  • direction of twist,
  • land and groove impression dimensions.
Land and Groove Impressions - left twist on left side, right twist on right side
Land and Groove Impressions - left twist on left side, right twist on right side
Courtesy of Jack Dillon (see reuse policy).
Land and Groove Impressions - left twist on left side, right twist on right side
Land and Groove Impressions - left twist on left side, right twist on right side
Courtesy of Jack Dillon (see reuse policy).

Back Forward