U.S. flag

An official website of the United States government, Department of Justice.

Firearms Examiner Training

Firearms Identification Information

Home  |  Glossary  |  Resources  |  Help  |  Contact Us  |  Course Map
 

Firearms Identification Information

Beretta 8040 Cougar D with 40 S&W ammunition designation on barrel
Beretta 8040 Cougar D with 40 S&W ammunition designation on barrel
Courtesy of Forensic Technology Inc. Gunsight Pro 3.0 (see reuse policy).

Modern commercial firearms produced in or imported to the United States are required to have their basic identification information readily available on the firearm. Prior to 1968, serial numbers were not required on long guns.

Firearm identification information includes the following:

  • Brand name or trademark
  • Serial number
  • Model designation
  • Caliber designation
  • Importer, if applicable

Confusion may occur when the caliber designation contains the name of a firearm manufacturer such as 38 Smith & Wesson or 223 Remington. For example, a first responder (or anyone not familiar with firearms identification) may mistakenly identify a firearm manufactured by Rohm as a Smith & Wesson because the barrel of the gun bears the mark 38 S&W, which is actually the designation for the recommended type of ammunition. The firearm examiner must be aware of the potential for confusion and verify the information contained in the submission documents.

High Standard Dura-Matic 101 series sold as the Sears Roebuck & Co. J.C. Higgins model 80
High Standard Dura-Matic 101 series sold as the Sears Roebuck & Co. J.C. Higgins model 80
Courtesy of Forensic Technology Inc. Gunsights Pro 3.0 (see reuse policy).

A number of firearms may be manufactured by one company and bear the name of the company that sold the firearm in their retail outlets, such as Western Auto, Sears, and Belknap. Many of these types of firearms do not have serial numbers, but do contain part numbers or store identification numbers. These are not serial numbers and should not be used as such. The examiner should not only list the brand name found on the firearm but should also determine the actual manufacturer of the firearm. Numerous lists and charts are available that contain this information.

View a list of firearms identification information at www.e-gunparts.com.

Read more about Small Arms Ammunition in Module 5.

Military Firearms

German model P.38 has a repeating cycle of serial numbers with individually numbered parts
German model P.38 has a repeating cycle of serial numbers with individually numbered parts
Forensic Technology Inc. Gunsights Pro 3.0 (see reuse policy).

Military firearms can be difficult to identify because they typically do not have a caliber designation; symbols and codes are used to identify the manufacturer. Measuring the bore diameter and chamber will normally provide the information needed to make a caliber determination. Knowledge of commonly used military ammunition assists the examiner in determining the caliber designation of a military weapon.

 

Proof Marks

Proof marks on a Beretta pistol
Proof marks on a Beretta pistol
Courtesy of Forensic Technology Inc. Gunsights Pro 3.0 (see reuse policy).

Some older foreign manufactured firearms, such as pistols from Spain and Italy, will list a location, rather than a manufacturer . These firearms are cottage industry type weapons without a specific brand name. The examiner must rely on proof marks when trying to identify these firearms. There are a number of reference books that display proof marks and their meanings.

Back Forward