U.S. flag

An official website of the United States government, Department of Justice.

Firearms Examiner Training

Weight, Force, and Their Measurement

Home  |  Glossary  |  Resources  |  Help  |  Contact Us  |  Course Map
 

Weight, Force, and Their Measurement

A well-known application of a balance beam
A well-known application of a balance beam
National Institute of Justice (NIJ) (see reuse policy).

Weight is a way of expressing the force of gravity on an object, assuming certain standard conditions, such as being at sea level. It is a convenient reference standard for firearm examiners and other forensic scientists.

The beam balance is one of the earliest devices used to obtain weight measurements. This instrument was used in a very simple way: by establishing a balance between a questioned weight and known or standard weights. Precision laboratory beam-style balances are sensitive and expensive. They are rapidly disappearing from most forensic laboratories and are being replaced by digital and electronic scales.

 

Digital Scales

A digital scale used to weigh small objects
A digital scale used to weigh small objects
Copyright © 2006 PACT (see reuse policy).

Today, examiners use a digital (electronic) scale to weigh small objects, such as bullets or bullet fragments. These instruments offer advantages over previously used technologies, including convenience, cost, speed, and accuracy.

Several components typically found in digital scales include

  • multiple strain gauges,
  • a load cell,
  • a signal amplifier,
  • a specialized microprocessor with built-in proprietary software.

 

A strain gauge is a paper-thin device that normally covers an area less than that of a dime. It can be permanently affixed to a metal surface to detect stretching or compression; the electrical resistance of the gauge changes with the stretching or compression of the metal surface.

Size comparison of a strain gauge mounted on a rifle and a dime
Size comparison of a strain gauge mounted on a rifle and a dime
Copyright © 2006, J. C. Schaefer (see reuse policy).

With the exception of the microprocessor, all of the technology used in digital scales has existed for many decades. When microchips became available, the digital scale was a natural development. The proprietary software (built into the microprocessor) processes the data initially provided by the strain gauges, providing stable and useable readings.

 

Calibration

Instrument calibration involves determining the difference (if any) between the output reading produced and a known standard, and remedying that difference. For digital scales, this means ensuring that the microprocessor correctly relates the amplified digital output signal to a standard weight. Manufacturers of the digital scales most commonly used by firearms examiners provide both known weights (usually not NIST traceable) and detailed but simple instructions for calibration. Calibration takes only a few minutes to perform but is necessary to ensure the accuracy of results.

Changes in heat and humidity as well as unlevel working surfaces can affect the readings of a digital scale by slightly shifting the zero point. Rough usage and power surges can cause harm to a digital scale.

Calibration of a digital scale is simple to perform. However, NIST traceable weights for calibration are a requirement of ISO/IEC 17025:2005 accredited laboratories.

A set of precision weights for balance calibration
A set of precision weights for balance calibration
National Institute of Justice (NIJ) (see reuse policy).

Back Forward