U.S. flag

An official website of the United States government, Department of Justice.

Firearms Examiner Training

Powder Metal Technology

Home  |  Glossary  |  Resources  |  Help  |  Contact Us  |  Course Map
 

Powdered Metal Technology

A powder metal mixture is cold pressed to form a bullet core
A powder metal mixture is cold pressed to form a bullet core
Photo Courtesy of FirearmsID.com (see reuse policy).

Powdered metal technology (PMT) is used more frequently in firearms manufacture. It is a form of casting that does not use molten metal. Finely powdered metal of the desired alloy is placed in a mold with a binder or flux and then heated until the particle boundaries partially melt and the particles fuse together. The advantage is excellent precision. Finished parts are often ready for cosmetic finishing and installation when removed from the mold. The downside is that PMT parts are not as strong as those made by investment casting or forging. PMT tends to be used for the manufacture of low-load parts, such as sight components and triggers.

 

 

Extrusion

Aluminum base for mounting telescopic sight, formed by extrusion
Aluminum base for mounting telescopic sight, formed by extrusion
Leupold & Stevens (see reuse policy).

Extrusion is used to form parts of uniform cross section in long strips that are later cut to final dimension. It is usually applied to nonferrous alloys to create low-load parts.

A bar of material is pressed through a die that is shaped in the negative of the final part. The result is a long part with the desired cross section. Cutting pieces to length makes the parts ready for final forming and finishing. Extrusion is commonly used to make aluminum bases for mounting telescopic sights.

Fine-Forming Operations

Fine forming starts with an intermediate part produced by casting, forging, or stamping. This process prepares the firearms component for final surface finishing and assembly. The majority of these metalworking operations fall under the general subject of machining. Machining covers just about every operation in which a moving tool removes metal to achieve final dimensions. In machining, a sharpened metal tool or abrasive surface refines and reduces the intermediate part to the desired form and dimension. The tool must be harder than the surface it shapes. Machining operations produce heat that, if not controlled, will destroy expensive tooling and potentially damage the intermediate part.

Back Forward